The Zone60 DG is a fully-automatic grade laser in both axes, specifically designed for construction workers who need the dependability and accuracy of a fully professional grade laser on a daily basis. Digital grades can be entered up to 15 per cent and is, therefore, suitable for every construction site. Through the display settings of inclinations in two axes, horizontal and vertical, are very simple.
Perfect for outdoor applications, such as grading of roads, the Zone60 DG allows you easily to correct and remove irregularities. It guarantees you repeatable and accurate results in long distances even in the toughest working conditions. The Zone60 DG is the ideal partner for level, single or dual slope as well as batterboard applications. It can be used to align for marking of formwork placing and also batterboard points to mark out axis. The Zone60 DG is ideal for contractors who need to grade and excavate for plans or ready build structures. The fully automatic operation in horizontal and sloped plane gives a perfect reference for all levelling and grading.
With the ZRD105B laser receiver the beam can be caught and monitored automatically. Fully-automatic grade specifically designed for construction workers who need the dependability and accuracy of a fully professional grade laser. With a straightforward user interface on both, the laser and the RF remote, the craftsman is always in full control.
- HIGHLIGHTS
- Range up to 3,000 feet with laser receiver
- Dual grade to ±15%
- Two adjustable rotation speeds
- Self-leveling within ±6 degrees
- Accuracy of ±1/16 inch at 100 feet
- Adjustable rotation speeds: 300 & 600
- RPMBattery life up to 40 hoursIP67 dustproof and water resistant
DUAL GRADE LASER
Best digital display technology with numerical readout, packed into a professional and robust housing. Fully featured for a top performance with precise results. Dual display, supported by adjustable LED and audio signals. Build-in flash suppression. This receiver can be used for all Zone Lasers.
ZRP105 PRO RECEIVER
Top performance. Professional format with a detailed, multi-channel analog, dual display, supported by adjustable LED and audio signals. Build-in flash suppression. This receiver can be used for all Zone Lasers.
ZRB90 BASIC RECEIVER
A long detection window and enables detecting at a length of 8cm. The accuracy read out of 1mm/2mm allows an easy finding of the laser beam. The ZRB90 Basic Receiver works up to 300m and runs from the power supply of 2 x AA alkaline batteries. It complies with the high standard of IP66.
***PICTURED LEFT TO RIGHT; FOR RED BEAM ONLY. THE DIGITAL AND PRO ARE BASICALLY THE LEICA ROD EYE 160 and ROD EYE 140***
- Built-in flash suppression.
- Beam Catching Technology
- Built-in Bubble Vial
- Dual Display
- Working Diameter: 900 m (3000 ft)
- Extended Detection Window: 105 mm / 4 in
- Numeric Readout Height: 90 mm / 3.5 in
- Detection Accuracy: Ultra Fine = ± 0.5 mm / ± 0.02 in, Super Fine = ± 1.0 mm / ± 0.04 in, Fine = ± 2.0 mm / ± 0.08 in, Medium = ± 3.0 mm / ± 0.12 in, Coarse = ± 5.0 mm / ± 0.20 in
- 2 Year Manufacturer's Warranty
Beam Catching
Find and align the laser plane by one key press for slope or vertical alignment application. Simply set up the laser, place the ZRD105B at the second point and then start the beam search, e.g. tie-in slopes. There is no more manually moving of laser plane or any calculations needed.
Beam Lock
With the Beam Lock function, the laser plane is caught and monitored in real time, which is valuable for connecting batter board points to mark-out axis.
Radio Technology
The ZRD105B is equipped with radio technology for reliable alignment and slope applications over long distances up to 100m.
The new receiver also allows digital readout of offset distances and is featured with a large reception window for fastest beam detection.
MORE ABOUT ZONE 60 FROM GEOMAX WEBSITE
LASER RECEIVERS FROM GEOMAX
CALL (562-426-1306) OR WRITE FOR YOUR PRICE AND PACKAGE DETAILS!!