VERTICAL PLUMB CONTROL
- One button operation with LCD display
- Accurate
- Versatile
- Easy to use
- Long Range
- The Quad 1000 plumb laser mounts to any 5/8×11 standard flat head tripod
- Special trivet mount gets the Quad 1000 five inches over your reference point, for fast and stable set-ups
- The base of the Quad 1000 plumb laser features built-in centering notches to align the laser over your point when placing on the deck.
The Quad 1000 is a 5 arc second zenith laser featuring electronic servo self-leveling with variable temperature compensation for the most accurate and consistent readings.
The Quad 1000 provides a downward shooting plumb laser for getting over your point, upward zenith laser to 1,200 feet (366m), one button operation with LCD display and up to 140 hours battery life.
The Quad 1000 is a self-leveling plumb laser with electronic temperature compensation. It measures or senses ambient temperature changes while in operation and continually recalibrates itself to maintain the highest degree of accuracy possible. This insures consistent, accurate readings for plumb control on your project throughout the course of the job.
Ultra bright target template with laser pass through for the most visable and precise readings. Special hard coat overlay to protect target face. Notched to act as a template for floor layout position of Quad 1000.
TUNNEL ALIGNMENT LASER
- The GL3000PMT-S is a heavy-duty design built for the rigors of the toughest construction environments, such as mining and tunneling.
- ¼” thick aluminum housing, hard coat anodized, IP68 rated, purged and filled with dry nitrogen.
- The GL3000PMT-S “GREEN” laser beam is fixed focused to infinity. This provides the smallest possible spot over the longest possible distance.
- The GL3000PMT-S GREEN Laser is 5x the brightness of traditional red beam lasers.
- High power 4.75mw of power assures you more range to target area, even in adverse weather or when shooting through a series of forward targets.
- Ultra-fine horizontal and vertical fine adjust with 64 pitch thread for fast and precise alignment set ups.
- The GL3000PMT-S is designed to accept a tribrach. This is especially beneficial when “leap frogging” to forward points in tunnel work.
- Tunnel Work - The GL3000PMT-S has three times the range (spot brilliance and quality) thus, reducing the need to move the laser forward.
- Marine Work - It translates to much greater visibility in adverse weather conditions. *Contact Factory for marine alignment configuration
The SAFER way to plow! Reduces damage caused by wing strikes by 90% or more. The GL3000PMC Guidance Laser uses an ultra-bright green laser-spot to establish a wing plow or tow plows trailing edge location before you get there. The laser-spot impacts on the road/snow surface ahead of the truck in the driver's normal field of view, showing the driver where the plow trailing edge will be. The GL3000PMC laser is electronically designed for both cold and hot weather operations, so it can also be used in the warmer months for alignment like the GL3000PM. (Paint striping trucks etc.)
GL3000PMC BROCHURE
Heavy Duty Vertical Control Lasers for Mining and Tunneling Shaft Alignment
“The long range solution for vertical shaft alignment”
The Quad 1000 HDD provides a self leveling (Downward) shooting laser for plumb control while the Quad 1000 HDU provides an (Upward) zenith self-leveling laser for vertical plumb control. Both models are built to withstand the harshest environments.
- Accurate: ±5 arc seconds (± 1/32 inch per 100 feet) (.793mm per 30.48 meters)
- Long Range: Provides plumb control up to 2,000 feet (610 meters) from original set up point.
- Rugged: Heavy duty ¼ inch thick aluminum housing with hard coat anodized finish
- Dust and waterproof: Purged and dry nitrogen filled with IP67 rating
QUAD !000 HD SERIES BROCHURE
