• This pole features a brass collet compression locking mechanism
  
• Constructed of sturdy aluminum tubing and a two-stage adjustable top-threaded tip
  
• Finished with electrostatic powder paint coating on the outer pole and permanent silk-screened on the inner pole
  
• Red and White
  
• Adjustable (precise)Tip
  
• Dual Grad (10ths/cm)
  

8.5-foot prism pole, 1 extension

12-foot prism pole, 2 extension

15-toot prism pole, 3 extension

Measures 1.28 feet (0.39 m) with 5/8 x 11 Threads, Available in Red or Yellow. Weighs 1.50 lb (0.68 kg)

SECO 5010-00 STAKEOUT POLE

BIPOD 5217-04

• Comes with no-crush bipod head, which prevents crushing of carbon fiber range or prism poles even when excess force is used
  
• A surveyor can set up a freestanding GPS antenna pole or prism pole 1-to-1.25 inch (25.4-to-31.8 mm) outside diameter
  
• Poles attach easily through the open clamp 1.5 inch (3.81 cm) outside diameter
  
• Poles can be loaded through the top Legs (independently) extend to 6 feet (1.8 m) and collapse to 43 inches (109 cm)
  
• Red or Fl. Yellow
• Weighs 4.25 lb (1.93 kg)
  
• Our most popular model!

• Comes with no-crush bipod head, which prevents crushing of carbon fiber range or prism poles even when excess force is used
  
• Comes with bag and clip to hold legs together for easy transport
  
• A surveyor can set up a freestanding GPS antenna pole or prism pole 1-to-1.25-inch (25.4-to-31.8 mm) OD
  
• Poles attach easily through the open clamp 1.5 inch (3.81 cm) OD poles can be loaded through the top
  
• The legs (independently) extend to 6 feet (1.8 m) and collapse to 43 inches (109 cm)
  
• SECO #5217-40

Metal yoke with side-mounted bubble is easy to read, 25.4 mm prism, 5 arcsec, silver coated, -30/0mm offset. Includes plastic cap, plumb bob prism mount, prism point, and padded bag!

Imported from the mysterious orient! Standard single prism, 64mm duiameter, -30/0mm offset. 6/8x11" female thread. Metal target, metal yoke. Attractive soft bag included!

• This system tilts and slides up and down pin poles
  
• Features a 25 mm, 0 offset silver-coated prism and a high-quality aluminum holder
  
• Site cones double as locks
  
• The prism has a 40-minute adjustable vial
  
• The kit includes four 1-foot (30.5 cm) pole sections each with a 0.50-ft (15.24 cm) mark
  
• Prism includes an adapter so it can be used on any pole or tribrach adapter with 5/8 x 11 threads
  
• A system bag is also included
  
• Weighs 1.40 lb (0.63 kg)
  
• Tribrach, adapter, and prism pole for illustrative purposes only, not included!

We are authorized dealers for their extensive line of survey accessories including adapters, poles, prisms, safety apparel, and more!

VISIT their website.

We are authorized dealers for their robust line of survey accessories including adapters, poles, prisms, tripods, safety apparel, and more!

VISIT their website.

• Ideal for all handheld prism work, topos or precise layout work; it can be assembled in various configurations
  
• This system comes with an adapter so that the prism assembly can be used with a standard 5/8 x 11 (male-threaded) prism poles, for height of 115 mm
  
• Also featuring a 40-minute adjustable vial and white sight cones that provides improved vertical angle pointing
  
• Comes with -17.5 mm – Nodal offset position
  
• An orange Cordura® carrying case is included
  
• All anodized aluminum section lengths are known (30 cm)
  
• All aluminum parts are Red

• Ideal for all handheld prism work, topos or precise layout work; it can be assembled in various configurations
  
• This system comes with an adapter so that the prism assembly can be used with a standard 5/8 x 11 (male-threaded) prism poles, for height of 115 mm
  
• Also featuring a 40-minute adjustable vial and white sight cones that provides improved vertical angle pointing
  
• Comes with 0,-30 mm offset position
  
• An orange Cordura® carrying case is included
  
• All anodized aluminum section lengths are known (30 cm)
  
• All aluminum parts are red

The 1360 is a 360-degree mini-reflector system that is compatible with Leica instruments and offsets.
Compatible with Leica instruments and offsets. (Prism offset +30mm), Precise standards, ≤5 sec. accuracy, Ideal for 360° surveying applications. Includes (4) 30 cm extensions with a 5 cm point, 1/4-20 threads. Also available a la carte.

03-ATP360

The SitePro Builder Series ATP360 is designed with the same -7mm offset and sizing as the Sokkia / Topcon ATP1. A low-cost solution that is compatible with the Sokkia and Topcon robotic stations Six (6) precision-machined corner cubes mounted in a rugged housing with solid metal core, 5 sec. accuracy 5/8-11 mounting thread on top and bottom. -7mm constant

03-3600 ROBOTIC PRISM SYSTEM

The SitePro 3600 robotic prism system is a precise 360-degree system that works with Spectra systems. Offset +2.0mm. Precision 360° robotic prisms ensure tracking lock. Seven 25.4mm prisms; ≤5 sec. accuracy.

03-2360 PROFESSIONAL PRISM SYSTEM

The 2360 professional 360-degree reflector prism system is compatible with Leica systems. Offset +23.1mm. 𢙅 sec. accuracy. Positions directly on a survey mark using the built-in point, height of 78mm. Six prisms are arranged to provide high pointing accuracy. 3D pointing accuracy of 2mm can be achieved. Target tracking range up to 2000-ft (600m)

03-GMAX360 PROFESSIONAL PRISM SYSTEM

The GMAX360 360-Degree Prism is a sturdy passive reflector for use with Robotic Total Stations. It has six corner-cube prisms that are joined together and are arranged in a way that measuring beams reflect directly back to its source, no matter the position. Compatible with Leica, +23.1 constant, ≤5 sec. accuracy. Six prisms are arranged to provide high pointing accuracy. Working range up to 2000-ft (600m)

03-LPR122 ROBOTIC PRISM SYSTEM
Compatible with Leica™ Systems. 360-degree prism assembly consist of six prisms bounded with +28.1mm constant. Centering accuracy: ± 2.0mm, working range up to 2000-ft (600m). 5/8-11 thread at bottom with Quick release adapter (prism height: 86 mm with quick release adapter.